Ovens & Drying Ovens

Printer-friendly version

These are primarily resistive heating loads with the possible addition of small motors for fans, spits, etc.  If there are no motors or they are all single phase types then a phase converter is not required. 

The heating elements can be re-arranged for direct single phase if 230V types or single phase via a step-up transformer if 400V types.

If the specification is 3 x 230V or similar, rather than 3-phase 400V or similar, then a phase converter should NOT be used as this is not a true three phase machine.

If you are in any doubt please call our technical team on 07572 532884 – please have as much information to hand as possible.